Posted on: 8 March 2017
Before you begin to do any work for the installation of a fence on your property, you will want to take some time to read through some helpful advice. This way, you will be much more likely to end up with the best possible fence.
Watch the Distance Between Posts
It is important to make sure that you are properly planning for the number of posts you will need so you can buy everything you need before the work ever begins. When planning out the number of posts you will need, you want to make sure that you are not having more than an eight foot distance between each of the posts. If you have more than that, you will notice that there is not as much stability in the fence line.
Mix the Concrete Before Putting It in the Post Holes
You may want to avoid pouring dry concrete into the post holes and then adding water for mixing because the concrete is not going to set as hard. It might take a little more time to mix the concrete little by little in a wheel barrow or large bucket and then pour it into the post hole, but you will end up with much better results. The concrete and the post will become one solid piece, which is what you want. Remember, the entire integrity of your fence is compromised if the fence posts are not holding up well.
Make Sure the Bottom of the Posts Go Below the Frost Line
It is vital to make sure that you are digging the post holes deep enough so the bottom of the posts will be below the frost line. Generally, this means that you need to dig at least two feet down, and some professional fence installers will even suggest placing a third of the length of the post under ground for maximum stability. It would be a good idea to make sure that you are checking with your local town authority to see if there are any ordinances that you have to follow in regards to the installation of the fence posts.
Let the Fence Dry Out Before You Apply the First Sealant
Many wood fence manufacturers will apply some finishes or moisturizers to their products. You will want those to dry up before you apply your own stain or sealant to the fence. If you do not wait a little bit, you may find that your wood fence is not going to be able to absorb the stain or sealant as you would have hoped. Therefore, once the fence has been completely installed, you will want to wait a few weeks for the wood to dry out some before taking further action.
Depending on the complexity of your fencing needs, you may be able to do the installation on your own. If you do not have any experience with the installation of fences, you may want to take the time to find a local fence installation expert like Hahn-AA Fencing who can help you.Share